PART NUMBER / MAYTAG
833697Maytag 833697 Refrigerator Condenser Fan Motor
This part is out of stock right now, so it cannot be added to the cart.
Part number 833697 is a refrigerator condenser fan motor listed under Maytag. If you are holding an old part with this number, it belongs to the cooling system of a refrigerator.
The condenser fan motor moves air across the condenser coils. This airflow helps remove heat from the refrigerant so the appliance can cool properly.
Turn off power at the breaker and test for power before touching any wires. A fan that hums but will not spin is often a bad capacitor, not a bad motor. Take a photo of every wire before removing a part. Move wires one at a time to the same spots on the new part.
Specifications
| Part number | 833697 |
|---|---|
| Brand | Maytag |
| Part type | Refrigerator condenser fan motor |
| Amps | .28A |
| Phase | 1 Phase |
| Rotation | CW |
| Rpm | 1550 |
| Shaft | ¼” Threaded |
| Voltage | 120V |
From the maker's and parts sellers' listings for this number. Compare with the label on your old part.
What the Condenser Fan Motor Does
A refrigerator condenser fan motor runs while the cooling cycle is active. It spins a fan blade that draws air across the warm condenser coils.
Moving heat away from the coils allows the sealed system to keep temperatures steady. If this motor stops spinning, the refrigerator cannot release heat as designed.
Understanding the 833697 Specifications
The label on your old unit includes electrical and mechanical ratings. Match these exact specifications when checking your part:
- Voltage: 120V
- Amperage: .28A
- Phase: 1 Phase
- Rotation: CW
- Speed: 1550 RPM
- Shaft: ¼” Threaded
Signs of Failure and Safe Replacement Steps
A failing condenser fan motor may stop turning, run slowly, or make unusual sounds. Dirt or worn bearings can prevent the shaft from spinning freely.
Follow these steps to inspect and replace the part safely:
- Turn off power at the breaker panel and unplug the appliance.
- Test for power using a reliable meter to make sure the circuit is dead.
- Access the motor compartment and take a photo of every wire connection.
- Disconnect the wires and remove the motor from its mounting bracket.
- Install the replacement motor and attach wires one at a time to the matching spots.
- Restore power at the breaker once everything is secure.
Read your old part
- Locate the label stamped or printed on your old motor housing.
- Read the part number directly from the old part to see if it shows 833697.
- Match the part number on the old part, or the appliance model it is listed for.
- Confirm the shaft type and rotation match the markings on your original unit.
When to call a pro
Hire a licensed HVAC technician or electrician for any step you are not sure you can do safely.
Questions
What does CW rotation mean on motor 833697?
CW stands for clockwise rotation. The shaft is designed to turn in this specific direction to direct airflow correctly.
What voltage does this motor require?
The listed voltage rating for part 833697 is 120V. It operates on 1 Phase power.
What should I do before disconnecting any wires?
Always turn off power at the breaker and test for power before touching anything. Take a photo of every wire so you can move each wire one at a time to the matching spot.
Refrigerator parts and water filters · All part numbers · Superseded part numbers, explained · Part number or model number
Brand names and part numbers identify the part and show fit. FindPart is not affiliated with, authorized by, or endorsed by any equipment maker. If you are not sure a repair is safe for you, call a licensed technician.